Best NSE7_LED-7.0 Exam Dumps for the Preparation of Latest NSE7_LED-7.0 Exam Questions [Q21-Q46]

Best NSE7_LED-7.0 Exam Dumps for the Preparation of Latest NSE7_LED-7.0 Exam Questions

Download Latest & Valid Questions For Fortinet NSE7_LED-7.0 exam

Fortinet NSE7_LED-7.0 is a certification exam that is designed to test the skills and knowledge of network security professionals in deploying, configuring, and managing Fortinet solutions for LAN edge environments. Fortinet is a global leader in network security solutions, and the NSE7_LED-7.0 certification exam is an important step towards becoming a certified Fortinet Network Security Expert.

 

NEW QUESTION # 21
Refer to the exhibit. Examine the FortiGate configuration, FortiAnalyzer logs, and FortiGate widget shown in the exhibit.
An administrator is testing the Security Fabric quarantine automation. The administrator added FortiAnalyzer to the Security Fabric, and configured an automation stitch to automatically quarantine compromised devices. The test device (10.0.2.1) is connected to a managed FortiSwitch device.
After trying to access a malicious website from the test device, the administrator verifies that FortiAnalyzer has a log for the test connection. However, the device is not getting quarantined by FortiGate, as shown in the quarantine widget.
Which two scenarios are likely to cause this issue? (Choose two.)

• A. FortiAnalyzer does not have a valid threat detection services license
• B. FortiAnalyzer does not consider the malicious website an indicator of compromise (IOC)
• C. The device does not have FortiClient installed
• D. The web filtering rating service is not working

Answer: A,B

Explanation:
According to the exhibits, the administrator has configured an automation stitch to automatically quarantine compromised devices based on FortiAnalyzer's threat detection services. However, according to the FortiAnalyzer logs, the test device is not detected as compromised by FortiAnalyzer, even though it tried to access a malicious website. Therefore, option B is true because FortiAnalyzer does not have a valid threat detection services license, which is required to enable the threat detection services feature. Option D is also true because FortiAnalyzer does not consider the malicious website an indicator of compromise (IOC), which is a criterion for identifying compromised devices.

NEW QUESTION # 22
Refer to the exhibits.

Examine the LDAP server configuration and output shown in the exhibits.

Note that the Distinguished Name and Username settings on the LDAP server configuration have been expanded to display their full contents.
An LDAP user named student cannot authenticate. While testing the student account, the administrator gets the CLI output shown in the exhibit.
According to the output, which FortiGate LDAP server settings must the administrator check?

• A. Bind Type
• B. Common Name Identifier
• C. Username
• D. Distinguished Name

Answer: C

NEW QUESTION # 23
Which EAP method requires the use of a digital certificate on both the server end and the client end?

• A. PEAP
• B. EAP-TLS
• C. EAP-TTLS
• D. EAP-GTC

Answer: B

Explanation:
Explanation
According to the FortiGate Administration Guide, "EAP-TLS is the most secure EAP method. It requires a digital certificate on both the server end and the client end. The server and client authenticate each other using their certificates." Therefore, option D is true because it describes the EAP method that requires the use of a digital certificate on both the server end and the client end. Option A is false because EAP-TTLS only requires a digital certificate on the server end, not the client end. Option B is false because PEAP also only requires a digital certificate on the server end, not the client end. Option C is false because EAP-GTC does not require a digital certificate on either the server end or the client end.

NEW QUESTION # 24
An administrator is testing the connectivity for a new VLAN The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate Quarantine is disabled on FortiGate While testing the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices The administrator also noticed that inter-VLAN communication works However intra-VLAN communication does not work Which scenario is likely to cause this issue?

• A. The native VLAN configured on the ports is incorrect
• B. The FortiSwitch MAC address table is missing entries
• C. Access VLAN is enabled on the VLAN
• D. The FortiGate ARP table is missing entries

Answer: C

NEW QUESTION # 25

Wireless guest users are unable to authenticate because they are getting a certificate error while loading the captive portal login page. This URL string is the HTTPS POST URL guest wireless users see when attempting to access the network using the web browser

Which two settings are the likely causes of the issue? (Choose two.)

• A. The FortiGate authentication interface address is using HTTPS
• B. The wireless user's browser is missing a CA certificate
• C. The external server FQDN is incorrect
• D. The user address is not in DDNS form

Answer: B,C

Explanation:
According to the exhibit, the wireless guest users are getting a certificate error while loading the captive portal login page. This means that the browser cannot verify the identity of the server that is hosting the login page.
Therefore, option A is true because the external server FQDN is incorrect, which means that it does not match the common name or subject alternative name of the server certificate. Option B is also true because the wireless user's browser is missing a CA certificate, which means that it does not have the root or intermediate certificate that issued the server certificate. Option C is false because the FortiGate authentication interface address is using HTTPS, which is a secure protocol that encrypts the communication between the browser and the server. Option D is false because the user address is not in DDNS form, which is not related to the certificate error.

NEW QUESTION # 26
Refer to the exhibit. Examine the FortiManager configuration and FortiGate CLI output shown in the exhibit.
An administrator is testing the NAC feature. The test device is connected to a managed FortiSwitch device (S224EPTF19005867) on port2.
After applying the NAC policy on port2 and generating traffic on the test device, the test device is not matching the NAC policy; therefore, the test device remains in the onboarding VLAN.
Based on the information shown in the exhibit, which two scenarios are likely to cause this issue?
(Choose two.)

• A. The device operating system detected by FortiGate is not Linux
• B. The MAC address configured on the NAC policy is incorrect
• C. Device detection is not enabled on VLAN 4089
• D. Management communication between FortiGate and FortiSwitch is down

Answer: A,B

Explanation:
https://docs.fortinet.com/document/fortiswitch/7.4.2/fortilink-guide/173271/fortiswitch-network- access-control

NEW QUESTION # 27
Which two statements about the guest portal on FortiAuthenticator are true? (Choose two.)

• A. Administrators must approve all guest accounts before they can be used
• B. Administrators can use one or more incoming parameters to configure a mapping rule for the guest portal
• C. The guest portal provides pre and post-log in services
• D. Each remote user on FortiAuthenticator can sponsor up to 10 guest accounts

Answer: B,C

Explanation:
The guest portal on FortiAuthenticator can offer services both before and after a guest logs in, such as displaying terms of use before login and providing access to network resources after successful authentication.
Administrators have the ability to configure mapping rules for the guest portal using various incoming parameters. This allows for flexible and dynamic handling of guest account creation and access permissions based on different criteria.

NEW QUESTION # 28
Refer to the exhibit.

Examine the IPsec VPN phase 1 configuration shown in theexhibit
An administrator wants to use certificate-based authentication for an IPsec VPN user Which three configuration changes must you make on FortiGate to perform certificate-based authentication for the IPsec VPN user? (Choose three)

• A. In the IKE section of the IPsec VPN tunnel in the Mode field select Main (ID protection)
• B. Create a PKI user for the IPsec VPN user, and then configure the IPsec VPN tunnel to accept the PKI user as peer certificate
• C. In the Authentication section of the IPsec VPN tunnel in the Method drop-down list select Signature and then select the certificate that FortiGate will use for IPsec VPN
• D. Enable XAUTH on the IPsec VPN tunnel
• E. Import the CA that signed the user certificate

Answer: C,D,E

Explanation:
Explanation
According to the FortiGate Administration Guide, "To use certificate-based authentication, you must configure the following settings on both peers: Select Signature as the authentication method and select a certificate to use for authentication. Import the CA certificate that issued the peer's certificate. Enable XAUTH on the phase 1 configuration." Therefore, options B, D, and E are true because they describe the configuration changes that must be made on FortiGate to perform certificate-based authentication for the IPsec VPN user.
Option A is false because creating a PKI user for the IPsec VPN user is not required, as the user certificate can be verified by the CA certificate. Option C is false because changing the IKE mode to Main (ID protection) is not required, as the IKE mode can be either Main or Aggressive for certificate-based authentication.

NEW QUESTION # 29
Refer to the exhibit.

By default FortiOS creates the following DHCP server scope for the FortiLink interface as shown in the exhibit What is the objective of the vci-string setting?

• A. To reserve IP addresses for FortiSwitch and FortiExtender devices
• B. To restrict the IP address assignment to devices that have FortiSwitch or FortiExtender as their hostname
• C. To restrict the IP address assignment to FortiSwitch and FortiExtender devices
• D. To ignore DHCP requests coming from FortiSwitch and FortiExtender devices

Answer: C

Explanation:
Explanation
According to the exhibit, the DHCP server scope for the FortiLink interface has a vci-string setting with the value "Cisco AP c2700". This setting is used to match the vendor class identifier (VCI) of the DHCP clients that request an IP address from the DHCP server. The VCI is a text string that uniquely identifies a type of vendor device. Therefore, option C is true because the vci-string setting restricts the IP address assignment to FortiSwitch and FortiExtender devices, which use the VCI "Cisco AP c2700". Option A is false because the vci-string setting does not ignore DHCP requests coming from FortiSwitch and FortiExtender devices, but rather accepts them. Option B is false because the vci-string setting does not reserve IP addresses for FortiSwitch and FortiExtender devices, but rather assigns them dynamically. Option D is false because the vci-string setting does not restrict the IP address assignment to devices that have FortiSwitch or FortiExtender as their hostname, but rather to devices that have "Cisco AP c2700" as their VCI.

NEW QUESTION # 30
Refer to the exhibit

A device connected to port2 on FortiSwitch cannot access the network The port is assigned a security policy to enforce 802 1X authentication While troubleshooting the issue, the administrator obtains the debug output shown in the exhibit Which two scenarios are likely to cause this issue? (Choose two.)

• A. The device does not support 802 1X authentication
• B. The device has been assigned the guest VLAN
• C. The device is not configured for 802 IX authentication.
• D. The device has been quarantined for 3600 seconds.

Answer: A,C

Explanation:
Explanation
According to the exhibit, the debug output shows that the device connected to port2 on FortiSwitch is sending an EAPOL-Start message, which is the first step of the 802.1X authentication process. However, the output also shows that the device is not sending any EAP-Response messages, which are required to complete the authentication process. Therefore, option A is true because the device is not configured for 802.1X authentication, which means that it does not have the correct credentials or settings to authenticate with the RADIUS server. Option D is also true because the device does not support 802.1X authentication, which means that it does not have the capability or software to perform 802.1X authentication. Option B is false because the device has not been quarantined for 3600 seconds, but rather has a session timeout of 3600 seconds, which is the default value for 802.1X sessions. Option C is false because the device has not been assigned the guest VLAN, but rather has been assigned the default VLAN, which is VLAN 1.

NEW QUESTION # 31
Refer to the exhibit.

Examine the debug output shown in the exhibit
Which two statements about the RADIUS debug output are true'' (Choose two)

• A. User authentication succeeded using MSCHAP
• B. The RADIUS server sent a vendor-specific attribute in the RADIUS response
• C. User authentication failed
• D. The user student belongs to the SSLVPN group

Answer: A,D

Explanation:
Explanation
According to the exhibit, the debug output shows a RADIUS debug output from FortiGate. The output shows that FortiGate sent a RADIUS Access-Request packet to FortiAuthenticator with the username student and received a RADIUS Access-Accept packet from FortiAuthenticator with a Class attribute containing SSLVPN.
Therefore, option A is true because it indicates that the user student belongs to the SSLVPN group on FortiAuthenticator. The output also shows that FortiGate used MSCHAP as the authentication method and received a MS-MPPE-Send-Key and a MS-MPPE-Recv-Key from FortiAuthenticator. Therefore, option D is true because it indicates that user authentication succeeded using MSCHAP. Option B is false because user authentication did not fail, but rather succeeded. Option C is false because FortiAuthenticator did not send a vendor-specific attribute in the RADIUS response, but rather standard attributes defined by RFCs.

NEW QUESTION # 32
You are configuring a FortiGate wireless network to support automated wireless client quarantine using IOC Which two configurations must you put in place for a wireless client to be quarantined successfully? (Choose two)

• A. Configure the wireless network to be in bridge mode
• B. Configure a firewall policy to allow communication
• C. Configure the FortiGate device in the Security Fabric with a FortiAnalyzer device
• D. Configure the wireless network to be in tunnel mode

Answer: C,D

Explanation:
Explanation
According to the FortiGate Administration Guide, "To enable automated wireless client quarantine using IOC, you must configure the following settings: Configure your wireless network to be in tunnel mode. This allows FortiGate to inspect all wireless traffic and applysecurity policies. Configure your FortiGate device in the Security Fabric with a FortiAnalyzer device. This allows FortiAnalyzer to detect indicators of compromise (IOC) from wireless traffic and send quarantine commands to FortiGate." Therefore, options A and B are true because they describe the configurations that must be put in place for a wireless client to be quarantined successfully using IOC. Option C is false because configuring a firewall policy to allow communication is not required, as the default firewall policy for tunnel mode wireless networks is to allow all traffic. Option D is false because configuring the wireless network to be in bridge mode is not supported, as FortiGate cannot inspect or quarantine wireless traffic in bridge mode.

NEW QUESTION # 33
Refer to the exhibit.

Examine the FortiManager information shown in the exhibit
Which two statements about the FortiManager status are true'' (Choose two)

• A. FortiSwitch is not authorized
• B. FortiSwitch manager is working in per-device management mode
• C. FortiSwitch manager is working in central management mode
• D. FortiSwitch is authorized and offline

Answer: B,D

NEW QUESTION # 34
You are setting up an SSID (VAP) to perform RADlUS-authenticated dynamic VLAN allocation Which three RADIUS attributes must be supplied by the RADIUS server to enable successful VLAN allocation'' (Choose three.)

• A. Tunnel-Preference
• B. Tunnel-Private-Group-ID
• C. Tunnel-Type
• D. Tunnel-Pvt-Group-ID
• E. Tunnel-Medium-Type

Answer: C,D,E

NEW QUESTION # 35
Refer to the exhibit.

Examine the FortiGate user group configuration and the Windows AD LDAP group membership information shown in the exhibit FortiGate is configured to authenticate SSL VPN users against Windows AD using LDAP The administrator configured the SSL VPN user group for SSL VPN users However the administrator noticed that both the student and j smith users can connect to SSL VPN Which change can the administrator make on FortiGate to restrict the SSL VPN service to the student user only?

• A. In the SSL VPN user group configuration set Group Nam to CN-SSLVPN, CN="users, DC- trainingAD, DC-training, DC-lab
• B. In the SSL VPN user group configuration, change Name to cn=sslvpn, CN=users, DC=trainingAD, Detraining, DC-lab.
• C. In the SSL VPN user group configuration set Group Name to ::;=Domain users.CN-Users
  /DC=trainingAD, DC-training, DC=lab.
• D. In the SSL VPN user group configuration change Type to Fortinet Single Sign-On (FSSO)

Answer: A

Explanation:
According to the FortiGate Administration Guide, "The Group Name is the name of the LDAP group that you want to use for authentication. The name must match exactly the name of the LDAP group on the LDAP server." Therefore, option A is true because it will set the Group Name to match the LDAP group that contains only the student user. Option B is false because changing the Name will not affect the authentication process, as it is only a local identifier for the user group on FortiGate. Option C is false because setting the Group Name to Domain Users will include all users in the domain, not just the student user. Option D is false because changing the Type to FSSO will require a different configuration method and will not solve the problem.

NEW QUESTION # 36
An administrator is testing the connectivity for a new VLAN The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate Quarantine is disabled on FortiGate While testing the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices The administrator also noticed that inter-VLAN communication works However intra-VLAN communication does not work Which scenario is likely to cause this issue?

• A. The native VLAN configured on the ports is incorrect
• B. Access VLAN is enabled on the VLAN
• C. The FortiSwitch MAC address table is missing entries
• D. The FortiGate ARP table is missing entries

Answer: C

Explanation:
Explanation
According to the scenario, the devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate. Quarantine is disabled on FortiGate, which means that the devices are not blocked by any security policy. The devices can ping FortiGate and FortiGate can ping the devices, which means that the IP connectivity is working. Inter-VLAN communication works, which means that the routing between VLANs is working. However, intra-VLAN communication does not work, which means that the switching within the VLAN is not working. Therefore, option C is true because the FortiSwitch MAC address table is missing entries, which means that the FortiSwitch does not know how to forward frames to the destination MAC addresses within the VLAN. Option A is false because access VLAN is enabled on the VLAN, which means that the VLAN ID is added to the frames on ingress and removed on egress. This does not affect intra-VLAN communication. Option B is false because the native VLAN configured on the ports is incorrect, which means that the frames on the native VLAN are not tagged with a VLAN ID. This does not affect intra-VLAN communication. Option D is false because the FortiGate ARP table is missing entries, which means that FortiGate does not know how to map IP addresses to MAC addresses. This does not affect intra-VLAN communication.

NEW QUESTION # 37
Refer to the exhibit.

Examine the FortiSwitch security policy shown in the exhibit
If the security profile shown in the exhibit is assigned to all ports on a FortiSwitch device for 802 1X authentication which statement about the switch is correct?

• A. FortiSwitch will assign non-802 1X devices to the onboarding VLAN
• B. FortiSwitch will try to authenticate non-802 1X devices using the device MAC address as the username and password
• C. All EAP messages will be terminated on FortiSwitch
• D. FortiSwitch cannot authenticate multiple devices connected to the same port

Answer: A

Explanation:
Explanation
According to the FortiSwitch Administration Guide, "If a device does not support 802.1X authentication, you can configure the switch to assign the device to an onboarding VLAN. The onboarding VLAN is a separate VLAN that you can use to provide limited network access to non-802.1X devices." Therefore, option C is true because it describes the behavior of FortiSwitch when the security profile shown in the exhibit is assigned to all ports. Option A is false because FortiSwitch can authenticate multiple devices connected to the same port using MAC-based or MAB-EAP modes. Option B is false because FortiSwitch will not try to authenticate non-802.1X devices using the device MAC address as the username and password, but rather use MAC authentication bypass (MAB) or EAP pass-through modes. Option D is false because all EAP messages will be terminated on FortiGate, not FortiSwitch, when using 802.1X authentication.

NEW QUESTION # 38
Which two pieces of information can the diagnose test authserver ldap command provide?
(Choose two.)

• A. It displays whether the admin bind user credentials are correct
• B. It displays the LDAP groups found for the user
• C. It displays the LDAP codes returned by the LDAP server
• D. It displays whether the user credentials are correct

Answer: B,D

Explanation:

NEW QUESTION # 39
Refer to the exhibit.

Examine the network diagram and packet capture shown in the exhibit
The packet capture was taken between FortiGate and FortiAuthenticator and shows a RADIUS Access- Request packet sent by FortiSwitch to FortiAuthenticator through FortiGate Why does the User-Name attribute in the RADIUS Access-Request packet contain the client MAC address?

• A. The client is performing user authentication
• B. The client is performing AD machine authentication
• C. FortiSwitch is authenticating the client using MAC authentication bypass
• D. FortiSwitch is sending a RADIUS accounting message to FortiAuthenticator

Answer: C

Explanation:
According to the exhibit, the User-Name attribute in the RADIUS Access-Request packet contains the client MAC address of 00:0c:29:6a:2b:3d. This indicates that FortiSwitch is authenticating the client using MAC authentication bypass (MAB), which is a method of authenticating devices that do not support 802.1X by using their MAC address as the username and password. Therefore, option B is true because it explains why the User-Name attribute contains the client MAC address. Option A is false because AD machine authentication uses a computer account name and password, not a MAC address. Option C is false because userauthentication uses a user name and password, not a MAC address. Option D is false because FortiSwitch is sending a RADIUS Access-Request message to FortiAuthenticator, not a RADIUS accounting message.

NEW QUESTION # 40
Refer to the exhibit.

Examine the LDAP server configuration shown in the exhibit Note that the Username setting has been expanded to display Its full content On the Windows AD server 10.0.1.10, the administrator used dsquery. which returned the following output:

According to the output which FortiGate LDAP setting is configured incorrectly''

• A. Bind Type
• B. Distinguished Name
• C. Username
• D. Common Name Identifier

Answer: B

Explanation:
Explanation
According to the exhibits, the LDAP server configuration on FortiGate has the Distinguished Name set to
"dc=training,dc=lab". However, according to the output of the dsquery command on the Windows AD server, the Distinguished Name of the domain should be "dc=trainingAD,dc=training,dc=lab". Therefore, option C is true because the Distinguished Name on FortiGate is configured incorrectly and does not match the actual Distinguished Name of the domain. Option A is false because the Common Name Identifier on FortiGate is configured correctly as "cn". Option B is false because the Bind Type on FortiGate is configured correctly as
"Regular". Option D is false because the Username on FortiGate is configured correctly as
"cn=admin,cn=users,dc=trainingAD,dc=training,dc=lab".

NEW QUESTION # 41
Which two statements about the guest portal on FortiAuthenticator are true? (Choose two.)

• A. Administrators must approve all guest accounts before they can be used
• B. Administrators can use one or more incoming parameters to configure a mapping rule for the guest portal
• C. The guest portal provides pre and post-log in services
• D. Each remote user on FortiAuthenticator can sponsor up to 10 guest accounts

Answer: B,C

Explanation:
Explanation
According to the FortiAuthenticator Administration Guide2, "The guest portal provides pre and post-log in services for users (such as password reset and token registration abilities), and rules and replacement messages can be configured." Therefore, option C is true. The same guide also states that "Administrators can use one or more incoming parameters to configure a mapping rule for the guest portal." Therefore, option D is true.
Option A is false because remote users can sponsor any number of guest accounts, as long as they do not exceed the maximum number of guest accounts allowed by the license. Option B is false because administrators can choose to approve or reject guest accounts, or enable auto-approval.

NEW QUESTION # 42
Refer to the exhibit.

Examine the LDAP server configuration shown in the exhibit Note that the Username setting has been expanded to display Its full content On the Windows AD server 10.0.1.10, the administrator used dsquery. which returned the following output:

According to the output which FortiGate LDAP setting is configured incorrectly''

• A. Bind Type
• B. Distinguished Name
• C. Username
• D. Common Name Identifier

Answer: B

NEW QUESTION # 43
Refer to the exhibits. The exhibits show the wireless network (VAP) SSID profiles defined on FortiManager and an AP profile assigned to a group of APs that are supported by FortiGate.
None of the APs are broadcasting the SSlDs defined by the AP profile.

Which changes do you need to make to enable the SSIDs to broadcast?

• A. In the SSIDs section enable Tunnel
• B. In the SSIDs section, enable Manual and assign the networks manually
• C. Enable one channel in the Channels section
• D. Enable multiple channels in the Channels section and enable Radio Resource Provision

Answer: C

Explanation:
To enable the SSID, you must select at least one channel for the radio. If no channels are selected, the SSID will not be enabled. Therefore, enabling one channel in the Channels section will allow the SSIDs to broadcast.

NEW QUESTION # 44
Which three protocols are used for controlling FortiSwitch devices on FortiGate? (Choose three.)

• A. CAPWAP
• B. HTTPS
• C. IGMP
• D. FortiLink
• E. FTP

Answer: A,C,E

NEW QUESTION # 45
Refer to the exhibits.

In the WTP profile configuration shown in the exhibit, the AP profile is assigned to two FAP-320 APs that are installed in an open plan office.

The first AP has 32 clients associated with the 5 GHz radios and 22 clients associated with the 2.4 GHz radio.
The second AP has 12 clients associated with the 5 GHz radios and 20 clients associated with the 2.4 GHz radio.
A dual-band-capable client enters the office near the first AP and the first AP measures the new client at -33 dBm signal strength. The second AP measures the new client at 2 -43 dBm signal strength.
If the new client attempts to connect to the corporate wireless network, with which AP radio will the client be associated?

• A. The second AP 2.4 GHz interface.
• B. The first AP 2.4 GHz interface.
• C. The second AP 5 GHz interface.
• D. The first AP 5 GHz interface.

Answer: C

NEW QUESTION # 46
......

Becoming certified in the Fortinet NSE 7 - LAN Edge 7.0 Exam can help IT professionals advance their careers and demonstrate their expertise in managing and securing LAN edge networks. Fortinet NSE 7 - LAN Edge 7.0 certification can also help organizations ensure that their network security professionals have the knowledge and skills necessary to protect their networks from advanced threats.

 

Exam Materials for You to Prepare & Pass NSE7_LED-7.0 Exam: https://examboost.latestcram.com/NSE7_LED-7.0-exam-cram-questions.html